Vortex 300 Stainless
Industrial Water Filters

  • For continuous solid-liquid separation
  • Separates 90% liquid
  • From 180µm particle size
  • All stainless steel
  • With flange connections
  • Pressure tight up to 6 Bar

Overview

Continuous industrial filter

Our industrial filters called Vortex Stainless are made entirely of stainless steel. Due to the unique arrangement of the filter mesh, they can be operated continuously without the need to interrupt the process cyclically. They are designed for unpressurized flowing water or comparable media.

Capacity

The filter is designed for a flow velocity of up to 1.6 m/s. The nominal flow rate is 13 liters per second, resulting in 90% filtered water and 10% rinse water. The rinse water is used for continuous removal of solids. The maximum flow rate is 80.6 liters per second. Here, a filtration rate of about 50% is achieved. Further values result from the following diagram:

Resistivity

Housing

The housing of the Vortex 300 Stainless consists of an upper part and a lower part. This allows the direction between inlet and outlet to be varied. Flange connections according to DIN are provided for the pipe connection.

The housing and filter insert are made of V2A stainless steel as standard. For harsh conditions, increased corrosion resistance is possible by using V4A.

Cover

The cover is made of the same stainless steel as the case. It is optionally waterproof up to a pressure of 1.5 or 6 bar. The 6-bar version of the Vortex 300 Stainless can be operated with one hand thanks to the integrated gas struts.

Filter insert

The stainless steel filter insert has a mesh size of 0.38µm as standard. Larger particles are flushed down to the outlet by the residual water. Finer mesh sizes from 180µm are available.

For particularly rough applications with abrasive solids, the filter insert can be coated with titanium nitride. This additionally increases the material strength.

Technical Data

Feinheit der Filterung
180µm Maschenweite
380µm Maschenweite
Weitere auf Anfrage
Richtungsänderung zwischen Zulauf und Abfluss
Einteiliges Gehäuse + Deckel Richtungsänderung nicht einstellbar
Zweiteiliges Gehäuse + Deckel Richtungsänderung einstellbar
Druckfestigkeit
mit Standarddeckel (ggf. Hebevorrichtung vorsehen) 1,5 Bar
mit pneumatischer Hebevorrichtung 6,0 Bar
Flansch-Anschlüsse nach DIN
Seitlicher Zufluss Ø DN 300
Seitlicher Filtratablauf Ø DN 200
Feststoffablauf nach unten Ø DN 300
Material
Gehäuse, Deckel und Filtereinsatz V2A Edelstahl
Gehäuse, Deckel und Filtereinsatz V4A Edelstahl
Filtereinsatz bei abrasiven Partikeln Optionale Beschichtung mit Titan-Nitrid

Item number

Vortex 300 Stainless | 6 bar | 380µm | one-piece housing WF 3030
Vortex 300 Stainless | 6 bar | 380µm | two-part housing WF 3031
Vortex 300 Stainless | 1.5 bar | 380µm | one-piece housing WF 3032
Vortex 300 Stainless | 1.5 bar | 380µm | two-part housing WF 3033

Downloads